Filter
Top Products
Optra plus, 4039, 4029, 4019, WinWriter 600 Printers
96
Optra plus, 4039, 4029, 4019,
WinWriter 600 Printers
The following table lists the maximum basis weights
supported by each of the special card stock and label trays, as
well as the manual feed tray. More detailed specifications
appear on the following pages.
For paper and transparency specifications, refer to your printer User’s Guide.
As the following table indicates, the paper tray capacities vary depending on the print material
construction. Refer to your printer documentation for additional specifications.
The table on Page 97 lists the print material specifications for the special card stock and label trays,
as well as guidelines for the tray position (upper or lower drawer). This information is intended to
convey general guidelines for tray and drawer selection. We recommend that you test your selected
print material to determine the best tray and drawer selection for your application. The material type,
rigidity, sizing, perforations, die-cuts, surface, and so on influence printing reliability. Contact your
point of purchase for more information on the optional trays available for your printer.
Note: If you use materials with a basis weight over 135 g/m
2
(36 lb bond), print
registration and skew may be unpredictable.
Overview of Card Stock and Label Support
Paper Source
Card Stock Labels
Index Bristol Tag Cover Paper Vinyl
200-Sheet Heavy Duty Tray
163 g/m
2
163 g/m
2
176 g/m
2
150 g/m
2
265 g/m
2
500-Sheet Tray (450 grams)
90 g/m
2
————
500-Sheet Tray (550 grams)
135 g/m
2
135 g/m
2
135 g/m
2
165 g/m
2
—
500-Sheet Tray (650 grams)
163 g/m
2
163 g/m
2
176 g/m
2
175 g/m
2
300 g/m
2
500-Sheet Tray (750 grams)
199 g/m
2
203 g/m
2
216 g/m
2
180 g/m
2
300 g/m
2
Manual Feed Tray
253 g/m
2
241 g/m
2
285 g/m
2
263 g/m
2
300 g/m
2
Estimated Tray Capacities for Labels
Label Material 200-Sheet Heavy Duty Tray 500-Sheet Card Stock & Label Tray
Paper, Dual Web 125 sheets 250 sheets
Vinyl, Polyester 70 sheets 200 sheets