Lexmark W820
81
When printing on labels:
• Set the Paper Type to Labels in the Paper Menu.
• Do not use label sheets with a slick backing material.
• Do not print within 1 mm (0.04 in.) of the die cut, the edge of the label or the perforations, or
between the die cuts.
• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a
paper jam.
• Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone
coating of the adhesive at least 1 mm (0.04 in.) away from the edges. Adhesive material may
contaminate you printer and could void your warranty.
When printing on card stock:
• Set the Paper Type to Card Stock.
• Do not use card stock that is creased. It may cause paper jams.
• We recommend the use of grain long card stock.