Filter
Top Products
Optra plus, 4039, 4029, 4019, WinWriter 600 Printers
99
cartridges can result in toner build-up in the printer, which increases the potential of toner
contamination.
Some card stock and labels generate a large amount of paper dust, debris, and chaff. To remove
excess dust and debris, you may need to clean the inside of the printer frequently, possibly daily.
Consult your printer documentation for specific instructions on how to properly clean your printer.
Removing debris helps improve paper feeding and fuse grade.
Refer to your printer documentation for other maintenance procedures to maintain the print quality
and reliability of your printer.
4039 12C printers (with serial numbers prior to BC143)
If the print quality begins to degrade when printing sheets of vinyl labels, we suggest you follow the
three cleaning steps below:
1 Print 5 sheets of paper.
2 Wait approximately 5 seconds.
3 Print 5 more sheets of paper.
To maintain printer feeding reliability, repeat this cleaning process every time you replace the print
cartridge, more often with some media. Failure to follow maintenance procedures could cause
jamming, poor print quality, feeding problems, and fuser problems.
WinWriter 600 (4035 5W), 4029, and 4019 printers
If the print quality begins to degrade when printing sheets of vinyl labels, we suggest you follow the
three cleaning steps below:
1 Print 5 sheets of paper.
2 Wait approximately 5 seconds.
To maintain printer feeding reliability, repeat this cleaning process every time you replace the print
cartridge, more often with some media. Failure to follow maintenance procedures could cause
jamming, poor print quality, feeding problems, and fuser problems.