Lexmark T520, T522
62
Pick Roller Technology
Like the Optra S and Optra T, the Lexmark T52x, Lexmark T62x and Lexmark T63x families of
printers use an auto compensator to pick the media rather than the corner buckler system used by
earlier printer models.
The Lexmark T520, T522 trays have two rollers that touch the media in two places (see “Figure 8” on
page 63). Avoid placing deep perforations in these areas since the media may nest, causing multiple
sheet feeds. Perforations that could cause nesting and tenting should fall outside the 0.31 - 0.79 in.
area on the leading edge of the media. (This is different from the 0.50 in. we recommend leaving at
Special Media Options
Source Part Number
250-Sheet Special Media Tray 11K1572
250-Sheet Special Media Drawer 11K1573
250-Sheet Universally Adjustable Tray 11K1574
250-Sheet Universally Adjustable Drawer 11K1878
500-Sheet Special Media Tray 11K1921
500-Sheet Special Media Tray + Drawer 11K1922
400-Sheet Universally Adjustable Tray 11K1941
400-Sheet Universally Adjustable Tray + Drawer 11K1942
250-Sheet Integrated Label Stacking Device, 8.5” x11” 43H5694*
500-Sheet Integrated Label Stacking Device, 8.5” x11” 43H5695*
250-Sheet Integrated Label Stacking Device, 8.5” x14” 43H5696*
* No longer available from Lexmark