Filter
Top Products
Label Design Guidelines
22
“Figure 4” on page 23 illustrates a recommended label design for Optra S, Optra T, and Lexmark T
laser printers, which uses a different paper picking mechanism.
Figure 3. Design Guidelines, Vinyl Label for Optra plus, 4039,
4029 and 4019 Printers
2.4 mm
3 mm
1.6 mm
6.35 mm
Leading Edge
8.5 in.
215.9 mm
8.38 mm
0.33 in.
0.5 in.
12.7 mm
Non-Print Area
Liner Edge
Stripped Edge
0.125 in.
0.06 in.
Perforation End
Liner Edge
Non-Print Area Non-Print Area
Non-Print Area
(Not drawn to scale)
0.25 in.
0.25 in.
6.35 mm
Driver Edge
11 in.
279.4 mm
Top Perforation
0.094 in.
8.38 mm
0.33 in.
waste strip 6.35 mm (0.25 in.)
waste strip