Lexmark 920 Printer User Manual


 
Notices
157
Notices
Korean MIC statement
If this symbol appears on your product, the accompanying
statement is applicable.
This equipment has undergone EMC registration as a business
product. It should not be used in a residential area.
The United Kingdom
Telecommunications Act 1984
This apparatus is approved under the approval number NS/G/1234/
J/100003 for the indirect connections to the public
telecommunications systems in the United Kingdom.
Noise emission levels
The following measurements were made in accordance with ISO
7779 and reported in conformance with ISO 9296.
ENERGY STAR
The EPA ENERGY STAR Office Equipment
program is a partnership effort with office
equipment manufacturers to promote the
introduction of energy-efficient products and
to reduce air pollution caused by power
generation.
Companies participating in this program introduce products that
power down when they are not being used. This feature will cut the
energy used by up to 50 percent. Lexmark is proud to be a
participant in this program.
As an ENERGY STAR Partner, Lexmark International, Inc. has
determined that this product meets the ENERGY STAR guidelines
for energy efficiency.
Waste from Electrical and
Electronic Equipment (WEEE)
directive
Radio frequency statements
Exposure to radio frequency radiation
The radiated output power of this device is far below the FCC radio
frequency exposure limits. A minimum separation of 20 cm (8
inches) must be maintained between the antenna and any persons
for this device to satisfy the RF exposure requirements of the FCC.
Industry Canada compliance statement
This device complies with Industry Canada specification RSS-210.
Operation is subject to the following two conditions: (1) this device
may not cause interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation of the device.
Avis de conformité aux normes de lindustrie du
Canada
Cet appareil est conforme à la spécification RSS-210 d'Industry
Canada. Son fonctionnement est soumis aux deux conditions
suivantes: (1) cet appareil ne peut engendrer aucune interférence
et (2) il doit accepter toute interférence qu'il reçoit, y compris celles
qui peuvent altérer son fonctionnement.
European Community (EC)
directives conformity
This product is in conformity with the protection requirements of EC
Council directives 89/336/EEC, 73/23/EEC, and 1999/5/EC on the
approximation and harmonization of the laws of the Member States
relating to electromagnetic compatibility, safety of electrical
equipment designed for use within certain voltage limits and on
radio equipment and telecommunications terminal equipment.
Compliance is indicated by the CE marking.
A declaration of conformity with the requirements of the directives
is available from the Director of Manufacturing and Technical
Support, Lexmark International, S. A., Boigny, France.
1-meter average sound pressure, dBA
Model
Base/
Network
Base/Network
with options DTN
Printing 53 57 55
Idling 45 45 45
Power Saver 33 33 33
For available information regarding the Waste
from Electrical and Electronic Equipment
(WEEE) directive, visit the Lexmark Web site
at www.lexmark.com or contact your
Lexmark representative.