Filter
Top Products
Ordering supplies
87
Maintaining the printer
Ordering supplies
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark Authorized Supplies
Dealers in your area. In other countries or regions, visit the Lexmark Web site at www.lexmark.com or contact the place
where you bought your printer.
Ordering a toner cartridge
When the [color] Low message appears, you should order a new print cartridge. You can print a few hundred pages after
the [color] Low message comes on. You need to have a new cartridge available when the current one no longer prints
satisfactorily.
Note: Be sure to shake your new print cartridge before installing it into the printer to maximize its yield.
The recommended print cartridges specifically designed for your printer are:
When the message Replace Black Toner and Oil Coating Roll appears, the black cartridge is empty. Replace both the black
toner cartridge and the oil coating roll. Order Lexmark part number C92035X to replace the oil coating roll.
Fuser and transfer belt
Order a fuser or a transfer belt when Fuser Life Warning or Transfer Belt Life Warning appears on the display.
Replace the items when Replace Fuser or Replace Transfer Belt appear. Each kit contains all the items necessary to
replace either the transfer belt or the fuser. See the following table for the maintenance kit part number for your specific
printer.
Ordering a black photodeveloper or color photodevelopers
We recommend ordering new photodevelopers when Black Photo Dev Life Warning or Color Photo Dev Life
Warning appears on the display.
Note: When replacing color photodevelopers, it is important to replace all four color photodevelopers at
once.
Order Lexmark part number C92030X for black or C92034X for color photodevelopers.
Part number Description Average yield
1
C9202CH Cyan toner cartridge 14,000 pages
C9202MH Magenta toner cartridge 14,000 pages
C9202YH Yellow toner cartridge 14,000 pages
C9202KH Black toner cartridge 15,000 pages
1
At approximately 5% coverage.
Maintenance items Part numbers
Transfer belt 0040X1251
Fuser 56P2650 (110 V)
56P2651 (220 V)