Filter
Top Products
200 Paper Jam <x> Pages Jammed (Check Areas A-F, T1-5, MPF)
99
Clearing jams
2 Remove any paper on the transfer belt.
If the paper source was the multipurpose feeder, check the area between the multipurpose feeder and the transfer
belt.
Warning: Do not use any pointed objects to remove the paper. This could cause permanent damage to the
transfer belt.
Note: If banner paper is jammed in the fuser area, continue with step 2 of the topic “Check Area B”. If
banner paper is jammed in the transfer belt area but has not entered the fuser, remove the jam by
rolling up the paper from inside the printer until the entire banner sheet is free.
3 Check the fuser area and top cover for additional jams.
If there is no jam in the fuser area or top cover, close the top cover and front door, and then press . If a jam is
present, continue with step 2 of the topic “Check Area B”.
Note: If you need instructions on how to close the top cover, see Closing the top cover.
Transfer belt