Filter
Top Products
90
Attach cables
— Token-Ring networks (Shielded Twisted Pair) use a DB9
connector.
— Ethernet 10Base2 networks (Thin Coax) use a
BNC T-connector.
Local printing
Note: All Windows operating
systems support parallel
connections. However, only the
Windows 98/Me and Windows
2000 operating systems support
USB connections. Some UNIX,
Linux, and Macintosh computers
also support USB connections.
Consult your computer
documentation to see if your
system supports USB.
You can attach your printer locally using either the standard USB port
or parallel port. A USB port is standard on all Lexmark W820 printer
models. We recommend Lexmark USB cable part number 12A2405
(2 m). The standard parallel port requires an IEEE-1284 compliant
parallel cable, such as Lexmark part number 1329605 (10 ft) or
1427498 (20 ft).
If you install an optional USB/Parallel Interface Card to the
Lexmark W820n or Lexmark W820dn, you need a 1284 A-C parallel
cable, such as Lexmark part number 43H5171 (9.8 ft), or a USB cable
such as Lexmark part number 12A2405 (2 m).
If you have installed an optional Tri-Port Adapter, you can locally
attach the printer with a serial cable. We recommend Lexmark part
number 1038693 (50 ft). For details on LocalTalk or infrared
connections, refer to the documentation that shipped with the Tri-Port
Adapter.
jp_setup.book Page 90 Friday, February 16, 2001 7:42 AM