Lexmark 820 Printer User Manual


 
vii
Preface
Preface
About your printer Three printer models are available:
The Lexmark W820 printer,
delivering 600 dots per inch (dpi)
resolution at up to 45 pages per
minute (ppm), ships with two 500-
sheet trays. This model comes
with 32MB of standard memory.
The Lexmark W820n, a network
model, comes with an Ethernet
10BaseT/100BaseTx print server
installed. This model comes with
64MB of standard memory.
The Lexmark W820dn, a network
model that ships with a duplex unit
attached.
Note: The illustrations in this manual
represent the Lexmark W820 model with
the optional high capacity feeder
installed, unless it is necessary to show
another configuration. Depending on the
printer model you have chosen and the
options you install, your printer may look
different.
You may have purchased your
Lexmark W820 as part of a multifunction
device with capabilities such as copying,
faxing, or scanning. For information
about setting up components other than
the printer, refer to the documentation
that came with your multifunction device.
Tray 2
Tray 1
O
pera
t
or pane
l
Standard output bin
Power
switch
Front cover
(Door F)
Jam access door
(Door A)
Multipurpose feeder
Stacking arm
jp_setup.book Page vii Friday, February 16, 2001 7:42 AM