Filter
Top Products
30
Install memory and option cards
Installing option cards Your printer has two connectors that
support the following option cards:
Note: The Lexmark W820n and
Lexmark W820dn printers ship with an
Ethernet print server already installed.
• Hard disk with adapter card
• MarkNet internal print server
• USB/Parallel 1284-C Interface
Card
• Parallel 1284-C Interface Card
• Coax/Twinax Adapter for SCS
• Tri-Port Adapter
You need a small Phillips screwdriver to
install these options.
Install a MarkNet internal print
server to add an Ethernet or Token-
Ring port for connecting your
printer to a network.
Install a USB/Parallel 1284-C or
a Parallel 1284-C Interface Card
to add a Universal Serial Bus
(USB) port or a parallel port.
Install a Tri-Port Adapter to add
LocalTalk, serial, and infrared ports.
For details on setting up and using
the Tri-Port Adapter, refer to the
documentation that shipped with
the card.
Install a MarkNet N2501e or N2401e internal
print server if you received either of these cards
as part of a multifunction printer upgrade.
Install a hard disk with adapter
card to add additional storage
space to your printer.
jp_setup.book Page 30 Friday, February 16, 2001 7:42 AM