Lexmark MX511DHE Printer User Manual


 
Custom Scan Sizes menu
Use To
Custom Scan Size [x]
Scan Size Name
Width
Height
Orientation
Portrait
Landscape
2 scans per side
Off
On
Specify a custom scan size name and page orientation.
Notes:
The custom scan size name replaces Custom Scan Size [x] in the printer
menus.
ADF Media Type is the factory default setting for custom scan sizes 3, 4,
5, and 6.
8.5 inches is the U.S. factory default setting for Width. 210 millimeters is
the international factory default setting for Width.
14 inches is the U.S. factory default setting for Height. 297 millimeters is
the international factory default setting for Height.
Portrait is the factory default setting for Orientation.
Off is the factory default setting for “2 scans per side.”
Universal Setup menu
Use To
Units of Measure
Inches
Millimeters
Identify the units of measure.
Notes:
Inches is the US factory default setting.
Millimeters is the international factory default setting.
Portrait Width
3–8.5 inches
76–216 mm
Set the portrait width.
Notes:
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
8.5 inches is the US factory default setting. You can increase the
width in 0.01inch increments.
216 mm is the international factory default setting. You can increase
the width in 1mm increments.
Portrait Height
3–14.17 inches
76–360 mm
Set the portrait height.
Notes:
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
14 inches is the US factory default setting. You can increase the
height in 0.01inch increments.
356 mm is the international factory default setting. You can increase
the height in 1mm increments.
Understanding the printer menus 143