Lexmark MX511DHE Printer User Manual


 
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of
toner from toner cartridge.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name Lexmark Return Program Regular
Imaging unit 500Z 500ZA
Ordering a maintenance kit
Notes:
Using certain types of paper may require more frequent replacement of the maintenance kit.
The separator roller, fuser, pick rollers, transfer roller, and redrive assembly are all included in the maintenance
kit and can be individually ordered and replaced if necessary.
Contact your service representative to replace the maintenance kit.
Recommended maintenance kits and part numbers
Maintenance kit Part number
100V maintenance kit
*
40X9146
110V maintenance kit 40X9135
220V maintenance kit 40X9136
* This is available only in Japan.
Ordering an ADF separator roller
Order an ADF separator roller when the ADF fails to pick paper or picks more than one sheet of paper at a time.
For information on replacing the ADF separator roller, see the instruction sheet that came with the part.
Recommended part numbers
Part name Part number
Separator roller 40X9108
Storing supplies
Choose a cool, clean storage area for the printer supplies. Store supplies right side up in their original packing until you
are ready to use them.
Do not expose supplies to:
Direct sunlight
Temperatures above 35°C (95°F)
High humidity above 80%
Maintaining the printer 217