Filter
Top Products
Use To
Rings to Answer
1–25
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Auto Reduction
On
Off
Scale an incoming fax job so that it fits the size of the paper loaded in the designated
fax source.
Note: On is the factory default setting.
Paper Source
Auto
Tray [x]
Multi‑Purpose Feeder
Manual Feeder
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Sides (Duplex)
Off
On
Enable two‑sided (duplex) printing for incoming fax jobs.
Notes:
• Off is the factory default setting.
• This menu item appears only when a print duplexer is installed.
Separator Sheets
Off
Before Job
After Job
Enable the printer to include separator sheets for incoming fax jobs.
Note: Off is the factory default setting.
Separator Sheet Source
Tray [x]
Manual Feeder
Specify where the printer will pick the separator sheet.
Note: Tray 1 is the factory default setting.
Fax Footer
On
Off
Print the transmission information at the bottom of each page from a received fax.
Note: Off is the factory default setting.
Max Speed
2400
4800
9600
14400
33600
Specify the maximum speed in baud at which faxes are received.
Note: 33600 is the factory default setting.
Fax Forwarding
Print
Print and Forward
Forward
Enable forwarding of received faxes to another recipient.
Note: Print is the factory default setting.
Forward to
Fax
E‑mail
FTP
LDSS
eSF
Specify the type of recipient to which faxes will be forwarded.
Notes:
• Fax is the factory default setting.
• This menu item is available only from the Embedded Web Server.
Understanding the printer menus 175