Filter
Top Products
Additional printer setup
Installing internal options
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord
from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn
them off as well, and unplug any cables going into the printer.
Available internal options
• Memory card
– DDR3 DIMM
– Flash memory
• Fonts
• Firmware cards
– Forms Barcode
– Prescribe
– IPDS
– Printcryption
• Printer hard disk
1
• Lexmark
TM
Internal Solutions Ports (ISP)
– Parallel 1284‑B interface
– MarkNet
TM
N8350 802.11 b/g/n wireless printer server
1
– MarkNet N8352 802.11 b/g/n wireless printer server
2
– MarkNet N8130 10/100 fiber interface
– RS‑232‑C serial interface
1
This internal option is available only in MX510de, MX511de, and MX511dhe printer models.
2
This internal option is available only in MX410de printer model.
Additional printer setup 26