Filter
Top Products
print irregularities 274
print is too dark 275
print is too light 276
printer is printing solid black
pages 278
repeating print defects appear on
prints 279
shadow images appear on
prints 280
skewed print 280
streaked horizontal lines appear
on prints 281
streaked vertical lines 282
toner fog or background
shading 283
toner rubs off 284
toner specks appear on prints 284
transparency print quality is
poor 284
uneven print density 285
white streaks 285
print troubleshooting
error reading flash drive 262
held jobs do not print 261
incorrect characters print 262
incorrect margins on prints 272
jammed pages are not
reprinted 259
job prints from wrong tray 263
job prints on wrong paper 263
jobs do not print 265
Large jobs do not collate 263
multiple‑language PDF files do not
print 264
paper curl 273
paper frequently jams 260
print job takes longer than
expected 266
tray linking does not work 267
unexpected page breaks
occur 268
printer
basic model 11
fully configured 11
minimum clearances 10
moving 10, 222, 223
selecting a location 10
shipping 223
printer configurations 11
printer control panel
factory defaults, restoring 226
indicator light 14
Sleep button light 14
using 14
printer control panel, virtual
display
using the Embedded Web
Server 224
Printer had to restart. Last job may
be incomplete. 249
printer hard disk
disposing of 209
encrypting 211
installing 38
removing 41
wiping 210
printer hard disk encryption 211
printer hard disk memory
erasing 210
printer information
where to find 9
printer IP address
finding 19
printer is printing blank pages 277
printer messages
[x]‑page jam, clear manual feeder.
[25y.xx] 237
[x]‑page jam, clear standard bin.
[20y.xx] 234
[x]‑page jam, open automatic
feeder top cover. [28y.xx] 238
[x]‑page jam, open front door.
[20y.xx] 230
[x]‑page jam, open rear door.
[20y.xx] 233
[x]‑page jam, open tray [x].
[24y.xx] 236
Cartridge low [88.xy] 240
Cartridge nearly low [88.xy] 240
Cartridge very low, [x] estimated
pages remain [88.xy] 240
Change [paper source] to [custom
string] load [paper
orientation] 240
Change [paper source] to [custom
type name] load
[orientation] 240
Change [paper source] to [paper
size] load [orientation] 241
Change [paper source] to [paper
type] [paper size] load
[orientation] 241
Close flatbed cover and load
originals if restarting job
[2yy.xx] 241
Close front door 241
Complex page, some data may not
have printed [39] 242
Configuration change, some held
jobs were not restored [57] 241
Defective flash detected [51] 242
Disk must be formatted for use in
this device 242
Error reading USB drive. Remove
USB. 242
Error reading USB hub. Remove
hub. 242
Fax memory full 242
Fax partition inoperative. Contact
system administrator. 243
Fax server 'To Format' not set up.
Contact system
administrator. 243
Fax Station Name not set up.
Contact system
administrator. 243
Fax Station Number not set up.
Contact system
administrator. 243
Imaging unit low [84.xy] 243
Imaging unit nearly low
[84.xy] 243
Imaging unit very low, [x]
estimated pages remain
[84.xy] 244
Incorrect paper size, open [paper
source] [34] 244
Insufficient memory for Flash
Memory Defragment operation
[37] 244
Insufficient memory to collate job
[37] 245
Insufficient memory to support
Resource Save feature [35] 245
Insufficient memory, some Held
Jobs were deleted [37] 244
Insufficient memory, some held
jobs will not be restored
[37] 244
Load [paper source] with [custom
string] [paper orientation] 246
Load [paper source] with [custom
type name] [paper
orientation] 246
Index 325