Filter
Top Products
Solving printer software installation problems
42
Using the CD that comes with your printer
1 Close all open software programs.
2 When your desktop appears, insert the printer software CD.
The Lexmark Z600 Series CD icon appears on your desktop.
3 Double-click the Lexmark Z600 Series CD icon.
4 Double-click Install.
5 Click Install and Agree.
Note: If the Printer Selection or the New Network Printer Found dialog appears, follow the
instructions displayed. Click ? on the screen or contact your network administrator
for help.
6 Choose the country or region closest to you.
7 Click Continue.
8 Follow the instructions on your screen to complete printer software installation.
9 On the Printer Selection screen, click Open Print Center.
Note: The Z600 Series should appear in the Print Center automatically. If it does not, click
Add Printer.
10 Click the red close button to close the Print Center.
11 On the Printer Selection screen, click Continue.
12 Install the print cartridges. For help, see “Install the cartridges” on page 33.
• If the alignment page does not print, make sure you installed the cartridges correctly.
Repeat the steps in “Install the cartridges” on page 33.
• If the paper is jammed, make sure you follow the instructions on the error message that is
displayed. For help, see “Clearing paper misfeeds or jams” on page 49.
Using the World Wide Web
1 Make sure Stuffit Expander is loaded on your system.
2 From the Lexmark Web site, www.lexmark.com, select the appropriate driver for your
operating system.
3 Click the binhex (.hqx) file to download and install.
4 Use Stuffit Expander to expand the file on your desktop.
5 Double-click the folder to open it.