Linksys BEFSR41 Network Router User Manual


 
EtherFast
®
Cable/DSL Routers
9. When your PC is finished restarting, click the Start button, and select
Settings, Control Panel, and Network. Make sure that TCP/IP is installed
for your PC as shown on the screen in Figure 6-8. By default, Windows 98
has TCP/IP installed. If TCP/IP is not installed, please go to “Appendix D:
Installing the TCP/IP Protocol” for instructions on installation.
Your USB installation is now complete.
Go to “Chapter 7: Configuring Your Network with the Cable/DSL Router.”
25
Instant Broadband
Series
7. Windows will notify you that it has completed copying the driver files to
your PC. Click the Finish button to complete the USB driver installation.
8. Windows will ask you if you want to restart your PC. Click the Yes button
so your new installation will take effect.
If it does not ask you to restart your computer, click the Start button, and
select Shut Down. Then select Restart and click the Ye s button.
24
Figure 6-6
Figure 6-7
Figure 6-8