Filter
Top Products
29
Chapter 7: Using the Wireless-G Ethernet Bridge Web-based Utility
Password
Wireless-G Ethernet Bridge with 5-Port Switch
Password
The Password screen, shown in Figure 7-13, lets you change the Bridge’s Username and Password and restore
the factory default settings.
• Username - It is strongly recommended that you change the factory default user name of the Bridge from
admin to a new password that you create. All users who try to access the Bridge’s Web-based Utility will be
prompted for the Bridge’s Password. The new Password must not exceed 12 characters in length and must
not include any spaces.
• Administrative Password - It is strongly recommended that you change the factory default password of the
Bridge from admin to a new password that you create. All users who try to access the Bridge’s Web-based
Utility will be prompted for the Bridge’s Password. The new Password must not exceed 12 characters in
length and must not include any spaces. Enter the new Password a second time to confirm it.
• Restore Factory Defaults - Click the Yes radio button to reset all configuration settings to their default values.
If you do not want to restore the factory defaults, then keep the default setting, No.
To save your changes, click the Apply button. Click the Cancel button to cancel your changes. Click the Help
button for additional on-screen information.
Figure 7-13: Password Tab
IMPORTANT: Any settings you have saved will be
lost if the default settings are restored.