Filter
Top Products
41
Chapter 7: Using the Wireless-G Ethernet Bridge Web-based Utility
Wireless-G Ethernet Bridge with 5-Port Switch
Click the Refresh button to obtain the most up-to-date settings and statistics. Click the Help button for additional
on-screen information.
SNMP
This screen is used to configure the SNMP Trap related settings for the Bridge.
SNMP Trap - Use this function to enable or disable snmp trap messages. The trap messages will be sent when
there is a cold start, or link state change events.
Trap Community - This is the trap community string sent with the trap message. SNMP manager will use this
string to decide if a specific trap message will be received and processed. The default is public.
Click the Apply Global Setting button to save your global settings.
New Address Entry - The New IP address destination for this device to send an SNMP trap to.
SNMP Trap Address Table - The list of IP addresses for the SNMP Trap Destination.
To add a new entry, enter the IP address in the New Address Entry field, and click the Add New Entry button. To
delete an entry, select the IP address in the SNMP Trap Address Table, and click the Delete Selected Entry
button.
Click the Help button for additional on-screen information.
Figure 7-23: SNMP Tab