Filter
Top Products
7-34
7.2.16. Setting the KBD PCB, MDC Modem and LCD Cable/MIC Frame
1. Connect the three Cables to the three Connectors
(CN930, CN950, CN952) on the KBD PCB.
2. Fix the KBD PCB using the two Screws<H>. No1, No2
3. Connect the Cable to the Connector (J2) on the MDC
Modem.
4. Attach the Sheet to the MDC Modem.
5. Fix the MDC Modem using the two Screws<I>. No3, No4
6. Attach the LCD Conductive Sheet and the Gasket to the
LCD Cable/MIC Frame.
7. Set the LCD Cable/MIC Frame to the Top Cabinet.
Note:
Tighten the Screws in the numbered order (No1 to No4).
Screws <H>: DFHE5025XA
Screws <I>: DFHE5025XA
n Attaching the Sheet to the MDC Modem
1. Connect the Cable to the Connector (J2) on the MDC Modem.
2. Attach the Sheet to the MDC Modem.
<H>
:No1
<H>
:No2
<I>
:No3
<I>
:No4
Connector CN950
(front side)
Connector CN930
(reverse side)
MDC
Modem
Sheet
KBD PCB
Connector CN952
(reverse side)
to Connector
(CN950)
to Connector
(CN952)
LCD Cable/
MIC Frame
LCD Conductive
Sheet
Gasket
to Connector
(J2)
Connector J2
(reverse side)
Connector J1
(reverse side)
to Connector
(CN930)
Top Cabinet
Place the Cable not to
pass through this range.
View "A"
View "A"
3~4mm
5~7mm
Sheet
Cable
MDC Modem
Connector (J2)
Sheet
Cable
MDC Modem
Connector (J2)
Safety Working