Filter
Top Products
USB-1616HS-2 User's Guide Installing the USB-1616HS-2
10
AI-EXP48
Analog input expansion module adds up to 24 differential or 48 single-ended inputs to the USB-1616HS-2.
CA-96A expansion cable
Expansion cable for connecting to the AI-EXP48 expansion board.
Additional documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf). This booklet supplies a brief description of
the software you received with your USB-1616HS-2 and information regarding installation of that software.
Please read this booklet completely before installing any software or hardware.
Unpacking the USB-1616HS-2
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the USB-1616HS-2 from its packaging, ground yourself using a wrist strap or by
simply touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, notify Measurement Computing Corporation immediately by
phone, fax, or e-mail:
Phone: 508-946-5100 and follow the instructions for reaching Tech Support.
Fax: 508-946-9500 to the attention of Tech Support
Email: techsupport@mccdaq.com
Installing the software
Refer to the Quick Start Guide for instructions on installing the software on the Measurement Computing Data
Acquisition Software CD. This booklet is available in PDF at www.mccdaq.com/PDFmanuals/DAQ-Software-
Quick-Start.pdf.
We recommend that you download the latest Windows Update onto your computer before installing and
operating the USB-1616HS-2.