Filter
Top Products
USB-1616HS-2 User's Guide Specifications
50
External power
Table 11. External power specifications (Note 5)
Connector Switchcraft # RAPC-712
Power range
6 to 16 VDC (used when USB port supplies insufficient power, or when an independent
power supply is desired)
Over-voltage
20 V for 10 seconds, maximum
Note 5: The power supply (MCC p/n TR-2U) and line cord (MCC p/n CA-1) are required if the USB port
cannot supply adequate power. By USB 2.0 standards, USB 2.0 ports must supply 2500 mW
(nominal at 5 V, 500 mA)
USB specifications
Table 12. USB specifications
USB-device type
USB 2.0 high-speed mode (480 Mbps) if available (recommended), otherwise, USB1.1
full-speed mode (12 Mbps)
Device compatibility
USB 2.0 (recommended) or USB 1.1
Environmental
Table 13. Environmental specifications
Operating temperature range -30 °C to +70 °C
Storage temperature range -40 °C to +80 °C
Relative humidity 0 to 95% non-condensing
Mechanical
Table 14. Mechanical specifications
Vibration MIL STD 810E category 1 and 10
Dimensions 269 mm (W) x 92 mm (D) x 45 mm (H )(10.6” x 3.6” x 1.6”)
Weight 431 g (0.95 lbs)
Signal I/O connectors and pin out
Table 15. Screw connector specifications
Connector type Screw terminal
Wire gauge range 14 AWG to 30 AWG
Expansion connector type 25-pin DSUB, female
Compatible expansion products AI-EXP48 expansion module with screw terminals