Filter
Top Products
24
Hardware Installation
2.7.7 IrDA Connector
The system board is equipped with an IrDA connector for wireless
connectivity between your computer and peripheral devices. The
IRDA (Infrared Data Association) specification supports data
transfers of 115K baud at a distance of 1 meter.
Connect your IrDA cable to connector J5 on the system board. Set
UART2 Mode Select in the Integrated Peripherals setup of the
Award BIOS to the type of IrDA standard supported by your
device. You must have the proper drivers installed in your operating
system to use this connector. Refer to your operating systems
manual or documentation.
Pin
1
2
3
4
5
Function
IRTX
Ground
IRRX
N. C.
VCC