Filter
Top Products
53
!
Award BIOS Setup Utility
3.1.11 IDE HDD Auto Detection
Use this option to detect the parameters for the hard disk drives
installed in your system. These parameters will then be automatically
entered into the "Standard CMOS Setup". The IDE HDD Auto
Detection screen displays the following categories of information: Size,
Cylinders, Heads, Precomp, LandZone, Sectors and Mode.
ROM PCI/ISA BIOS
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
HARD DISKS TYPE SIZE CYLS HEAD RECOMP LANDZ SECTOR MODE
Primary Master:
Select Primary Master Option (N=Skip): N
OPTIONS SIZE CYLS HEAD RECOMP LANDZ SECTOR MODE
2 (Y) 853 827 32 0 1653 63 LBA
1 853 1654 16 65535 1653 63 Normal
3 853 827 32 65536 1653 63 Large
Note: Some OS (like SCO-UNIX) must be “NORMAL” for installation
ESC: Skip
The settings on the screen are for reference only. Your version may not be
identical to this one.
3.1.10 User Password
If you want another user to have access only to your system but not
to setup, set a users password with the System option selected in
the BIOS Features Setup. If you want a user to enter a password when
trying to access setup, set a users password with the Setup option
selected in the BIOS Features Setup.
Using users password to enter Setup allows a user to access only the
User Password option that appears on the main screen. Access to
all other options is denied. To set, confirm, verify, disable or delete a
users password, follow the procedures described in the section
Supervisor Password. If you forget your password, refer to the
procedure described in the same section.
For hard drives larger than 528MB, you would typically select the LBA
type. Certain operating systems require that you select Normal or
Large. Please check your operating systems manual or Help desk on
which one to select.