Filter
Top Products
45
!
Award BIOS Setup Utility
4. Power-on the computer system. After the memory test, press
<Del> to enter the Award BIOS setup utility.
5. Select Power Management Setup and press <Enter>.
6. Enable the Resume on Ring field.
7. Press <Esc> to return to the main menu of the Award BIOS
setup utility. Select Save & Exit Setup and press <Enter>.
8. Type <Y> and press <Enter>.
Resume On LAN
With a LAN card installed, the Wake-On-LAN function allows the
network to remotely wake up a Soft Power Down (Soft-Off) PC.
However, if your system is in the Suspend mode, you can wake-
up the system only through an IRQ or DMA interrupt. Make sure
your LAN card supports the remote wakeup function. To use this
function, set this field to Enabled. Refer to the Wake-On-LAN
Connector section in chapter 2 of this manual for more
information.
Resume On Alarm
Enabled When Enabled, the Date (of Month) and Timer
(hh:mm:ss) fields will appear right below this field. You
can set the date and time you would like the Soft
Power Down (Soft-Off) PC to power-on. However, if
the system is being accessed by incoming calls or the
network (Resume On Ring/LAN) prior to the date and
time set in these fields, the system will give priority to
the incoming calls or network.
Disabled Disables the automatic power-on function. (default)
Date (of Month)
0 The system will power-on everyday according to the time
set in the Timer (hh:mm:ss) field.
1-31 Select a date you would like the system to power-on. The
system will power-on on the set date, and time set in the
Timer (hh:mm:ss) field.
Timer (hh:mm:ss)
This is used to set the time you would like the system to power- on.
If you want the system to power-on everyday as set in the Date (of