Filter
Top Products
35
!
Award BIOS Setup Utility
CPU L1 Cache and CPU L2 Cache
These categories speed up the memory access. The default value is
enabled. Enable the External Cache for better performance.
CPU L2 Cache ECC Checking
Intel Celeron
TM
processors come with built-in Level 2 cache. By
default, ECC is enabled to check the Level 2 cache. If you are not
using this function, set this field to Disabled.
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power
on your system. When Enabled, the BIOS will shorten or skip some
check items during POST.
Boot Sequence
This category determines which drive to search first for the disk
operating system. The default is A, C, SCSI. The options are:
A, C, SCSI; C, A, SCSI; C, CDROM, A; CDROM, C, A;
D, A, SCSI; E, A, SCSI; F, A, SCSI; SCSI, A, C;
SCSI, C, A; C only; LS/ZIP, C.
Swap Floppy Drive
When this option is enabled and the system is booting from the floppy
drive, the system will boot from drive B instead of drive A. When this
option is disabled and the system is booting from the floppy drive, the
system will boot from drive A. You must have two floppy drives to
use this function.
Boot Up Floppy Seek
When enabled, the BIOS will check whether the floppy disk drive installed
is 40 or 80 tracks. Note that the BIOS cannot distinguish between 720K,
1.2M, 1.44M and 2.88M drive types as they are all 80 tracks. When
disabled, the BIOS will not search for the type of floppy disk drive by
track number. Note that there will not be any warning message if the drive
installed is 360KB.