Filter
Top Products
Advanced Mouse Emulation
In the Advanced Mouse settings, you can set the type of mouse that you would like
Smart 108/116 IP
to emulate.
settings unless there is erratic mouse behavior (
random clicks and
jumping arbitrarily around the screen).
These settings come into effect when Smart 108/116 resets the local mouse after the
KVMIP session is over.
To
set the type of mouse that you want
1. In the
Mouse Settings box
The Mouse Emulation box appears.
2.
Select the mouse connected to the Local Console port on the
follows:
Standard Mouse –
i
this case, clear the
Wheel Mouse –
Microsoft mouse or Microsoft optical mouse
3. In Max Rate,
select the maximum mouse report rate.
For Sun Solaris t
he de
4. Click OK.
4.9.2 Aligning the M
ouse
When accessing the target server, the mouse pointers may appear at a distance to
each other
, due to the mouse on
host system. You can align the local mouse pointer with the remote target device’s
mouse pointer.
Conducting
Synchronizing
Advanced Mouse Emulation
In the Advanced Mouse settings, you can set the type of mouse that you would like
to emulate.
It is recommended not to change
the advanced
settings unless there is erratic mouse behavior (
for example,
the mouse is making
jumping arbitrarily around the screen).
These settings come into effect when Smart 108/116 resets the local mouse after the
set the type of mouse that you want
Smart 108/116 IP to emulate:
Mouse Settings box
(see Figure 42), click Advanced.
The Mouse Emulation box appears.
Figure 44 – Mouse Emulation Box
Select the mouse connected to the Local Console port on the
Smart 108/116 IP
i
f the local mouse is a non-Microsoft two-butt
o
this case, clear the
Microsoft Mouse checkbox.
Microsoft mouse or Microsoft optical mouse
select the maximum mouse report rate.
he de
fault value is 20 in order to support older
Sun
ouse
Pointers
When accessing the target server, the mouse pointers may appear at a distance to
, due to the mouse on
Smart 108/116 IP
losing sync with the mouse on the
host system. You can align the local mouse pointer with the remote target device’s
Conducting
a Remote Session
Synchronizing
Mouse Pointers
User Guide | 55
In the Advanced Mouse settings, you can set the type of mouse that you would like
the advanced
the mouse is making
These settings come into effect when Smart 108/116 resets the local mouse after the
Smart 108/116 IP
, as
o
n mouse; in
Sun
versions.
When accessing the target server, the mouse pointers may appear at a distance to
losing sync with the mouse on the
host system. You can align the local mouse pointer with the remote target device’s