Filter
Top Products
Operating
the Smart 108/116 IP Switching System Locally
Upgrading
the Smart 108/116 IP Firmware
72 | Smart 108/116 IP
Inputting and Updating DDC Information (F10)
Display Data Channel (DDC) is a VESA standard for communication between a
monitor and a video adapter.
When first installing the
system
to the Smart 108/116 IP switch into the memories of all connected ROC/RICCs.
To input the DDC information:
1.
Disconnect the Video cable of all RICCs
be disconnected.
2. Press Shift
twice to open the OSD.
3. Press F10.
“
Please wait” flashes a few times and disappears.
is sent to all ROC/RICCs.
4.
Reconnect the Video cable of all RICCs.
You should u
pdate the DDC information in any of the following circumstances:
When replacing the monitor connected to Smart 108/116 IP
When adding a new ROC/RICC to the system
When reconnecting an existing ROC/RICC that was temporarily used in a different
system
To update the DDC information, follow the steps in the procedure for inputting DCC
information.
6.3
Upgrading the Smart 108/1
With the Smart 108/116 IP Switch Update software
for the:
Switch processors
RICC/ROCs
The Update software enables you to add new features and fix bugs in a quick and
efficient manner. You can also return the OS
Update software. You can i
nstall the Update software on any computer, even one
is
not part of the Smart 108/116 IP system.
6.3.1 Downloading
Update
The Update software and latest firmwar
at:
http://www.minicom.com/phandlc.htm
You can download any of t
he
the Smart 108/116 IP Switching System Locally
the Smart 108/116 IP Firmware
Inputting and Updating DDC Information (F10)
Display Data Channel (DDC) is a VESA standard for communication between a
monitor and a video adapter.
system
, i
nput the DDC information of the monitor connected
to the Smart 108/116 IP switch into the memories of all connected ROC/RICCs.
To input the DDC information:
Disconnect the Video cable of all RICCs
from the computers. ROCs do not need to
twice to open the OSD.
Please wait” flashes a few times and disappears.
The monitor’s DDC
i
s.
Reconnect the Video cable of all RICCs.
pdate the DDC information in any of the following circumstances:
When replacing the monitor connected to Smart 108/116 IP
Switch
When adding a new ROC/RICC to the system
When reconnecting an existing ROC/RICC that was temporarily used in a different
To update the DDC information, follow the steps in the procedure for inputting DCC
Upgrading the Smart 108/1
16 IP Firmware
With the Smart 108/116 IP Switch Update software
,
you can upgrade the firmware
The Update software enables you to add new features and fix bugs in a quick and
efficient manner. You can also return the OS
D to the factory default settings via the
nstall the Update software on any computer, even one
not part of the Smart 108/116 IP system.
Update
Software and Latest Firmware
The Update software and latest firmwar
e for your system are located on our website
http://www.minicom.com/phandlc.htm
he
following firmware packages:
Display Data Channel (DDC) is a VESA standard for communication between a
nput the DDC information of the monitor connected
to the Smart 108/116 IP switch into the memories of all connected ROC/RICCs.
from the computers. ROCs do not need to
nformation
pdate the DDC information in any of the following circumstances:
When reconnecting an existing ROC/RICC that was temporarily used in a different
To update the DDC information, follow the steps in the procedure for inputting DCC
you can upgrade the firmware
The Update software enables you to add new features and fix bugs in a quick and
D to the factory default settings via the
nstall the Update software on any computer, even one
that
e for your system are located on our website