Filter
Top Products
Operating the Smart 108/116 IP Switc
hing System Locally
Using the OSD
62 | Smart 108/116 IP
Figure
Lines with yellow text show active computers. Lines with blue text show inact
computers. The Type
column indicates
port.
6.2.1
Navigating the OSD
You can navigate the OSD, as follows:
To move up and down –
To jump from one column to the next (when relevant)
To exit the OSD or return to a previous window within the OSD
6.2.2
Selecting a Computer
To select a computer:
1.
Navigate to the desired computer line.
OR
Type the port number of the desired
2. Press Enter.
The selected computer is accessed. A Confirmation label appears showing which
computer is accessed.
When the OSD is displayed
hotkeys.
6.2.3 Configuring t
he OSD Settings
You can configure the following OSD settings:
General (see Section
6.2.4
hing System Locally
Figure
52 – OSD Main Window
Lines with yellow text show active computers. Lines with blue text show inact
column indicates
that
a computer “C” is connected to the
Navigating the OSD
You can navigate the OSD, as follows:
Use the Up and Down arrow keys.
To jump from one column to the next (when relevant)
– Use the Tab
key
To exit the OSD or return to a previous window within the OSD
– P
ress
Selecting a Computer
Navigate to the desired computer line.
Type the port number of the desired
computer.
The selected computer is accessed. A Confirmation label appears showing which
When the OSD is displayed
,
you cannot select computers using the keyboard
he OSD Settings
You can configure the following OSD settings:
6.2.4
)
Lines with yellow text show active computers. Lines with blue text show inact
ive
a computer “C” is connected to the
key
.
ress
Esc.
The selected computer is accessed. A Confirmation label appears showing which
you cannot select computers using the keyboard