Filter
Top Products
SMART 116 IP
11
To computer’s
USB Port
To computer’s
Video Card
Figure 7 RoC USB (SUN)
10.2.1 Connecting a RoC/RICC PS/2
The connections for RoC/RICC PS/2 are exactly the same. Figure 8 illustrates the
RICC PS/2.
You can connect the RoC/RICC PS/2 to a powered on computer, but it must be in
the following order:
1. Connect the Mouse connector to the computer’s Mouse port.
2. Connect the Keyboard connector to the computer’s Keyboard port.
3. Connect the Screen connector to the computer’s Video port.
Failure to connect in the above order while the server is running, may lead to the
mouse malfunctioning until the server is rebooted.
To computer’s
keyboard port
CAT5 cable to Smart 116
IP Server port
To computer’s
mouse port
To computer’s
Video card
RICC PS/2
Keybd
Mouse
100T
VideoSerial A
Parallel
PCI 33Mx32b
PCI 33Mx32b
PCI 33Mx32b
PCI 33Mx32b
Serial B
SCSI
Figure 8 RICC PS/2 connections