Filter
Top Products
SMART 116 IP
19
Install switch definition file
In the event that Minicom’s Technical Support updates the Switch Definition file,
the file will be available in the Support section of our website -
www.minicom.com.
1. Load the file onto the Client computer.
2. Locate and install the Switch Definition file. The switch definition file is
replaced.
17. Administration > User Targets
By default access is denied to all servers for all user types including
Administrators. You must define the access rights of each user separately.
To do so:
1. From the menu click User Targets. The User Targets Configuration window
appears, see Figure 15.
Figure 15 User Targets Configuration
2. Select a user from the User drop-down menu.
3. Check the Target servers the user can access (according to his access
permissions). To select all Target servers, press Select All.
4. Click Apply, the selection is saved.
5. Repeat the above steps for each user.