Filter
Top Products
SMART 116 IP
35
Figure 32 Warning
3. Click OK, the factory defaults are restored. When the process finishes Figure 33
appears.
Figure 33 Reboot
4. Click Reboot to restart the unit.
24.3 Restoring the device firmware
Contact Minicom Technical Support support@minicom.com, to receive the
Upgrade firmware required to restore the device firmware. Save the Upgrade
firmware on the hard disk of a computer connected to the network.
To restore the device firmware:
1. From the Safe mode menu choose Firmware Upgrade.
2. Locate the Upgrade firmware and click Install, then click Start Upgrade. The
firmware upgrades.When the process finishes Figure 34 appears.
Figure 34 Reboot
3. Click Reboot to restart the unit.