Filter
Top Products
USER GUIDE
40
1. Navigate to the Keyboard language line.
2. Toggle between the options using the Space bar.
26.3.1.7 Editing the Switch name
You can substitute up to 18 characters in the line. A space constitutes a character.
When there is more than one switch in the system give each Switch’s OSD a
different name.
26.4 F7 Defaults
Press F7 to return the OSD to the factory default settings. Note! All changes made
will be erased.
26.5 The Ports settings
In the Settings window navigate to the Ports line and press Enter. The Ports
settings window appears see Figure 38.
Figure 38 Ports Settings window
26.5.1 Editing the computer name
In this window you can edit the computer names with up to 15 characters. (To
avoid confusion the names given in the OSD should match the names given in the
web configuration).
To erase a character:
Select it and press the Space bar. Blank spaces remain in place of the erased
character.
To erase an entire line:
Place the cursor at the beginning of the line. Keep the Space bar depressed until
the line is erased.