Mitsubishi Electronics WD390U-EST Projector User Manual


  Open as PDF
of 69
 
EN-44
Operation
Starting USB Display projection
1. Select a USB Display input by pressing the
USB DISP. button on the remote control or the
COMPUTER button on the projector.
• Eachtimeyoupressthe COMPUTER
button, the input source is switched between
Computer1, Computer2, HDMI, LAN Display,
USB Display and PC Less Presentation.
• WhentheUSB Display input is selected, the
splash screen for USB Display appears on the
screen.
2. When the computer is connected to the projector,
the computer image is automatically displayed on
the screen.
Ending USB Display projection
When using Windows XP, Windows Vista,
Windows 7, Windows Server 2008 R2 or
Windows MultiPoint Server
3. Unplug the USB cable from the projector.
• Itisnotnecessaryto“SafelyRemoveHardware”
on the computer or to press the UNPLUG
button on the remote control.
When using Mac OS X
3.
On the computer, open the Finder and click “ ”
on the
right of [USB_DISPLAY] to unmount the projector.
4. Unplug the USB cable from the projector.
Important:
• When the image is projected, the computer
resolution will be changed according to the
projector model and will be automatically recovered
after unplugging the USB cable.
Advanced display utilities (continued)
LAN Display
You can project the computer images inputted via a
wired or wireless LAN.
You can also perform the following during the LAN
Display projection:
• 4-to-1splitscreenprojection
Images from up to 4 computers can be projected
split on 1 projector screen.
• Remotedesktop
Connecting an input device such as a mouse or
keyboard to the USB-A terminal on the projector
enables the following computer operations from the
projector.
• Showinglocallesofthecomputer
• Operatingtheapplicationsoftware
• Showingserverlesonthenetwork
• Browsingoftheinternet
• SidePad
Computer images are transferred to the tablet
computer and you can operate the computer from
the tablet computer.
To use the LAN Display function, you need to install
the software “LAN Display System” contained in the
attached CD-ROM.
Supported OS’s are as follows:
• WindowsXP
• WindowsVista
• Windows7
• WindowsServer2008R2
• WindowsMultiPointServer
• MacOSX10.5 or later
Important:
• MaccomputersbasedonthePowerPCprocessors
are not supported.
• Remotedesktopcannotbeperformedduring4-to-
1 split screen projection.
Installation of software
Installing LAN Display System
Before starting installation, be sure to read “ReadMe.
txt” contained in the CD-ROM.
When using Windows XP, Windows Vista,
Windows 7, Windows Server 2008 R2 or
Windows MultiPoint Server
1. Copy “LAN Display System_v201.exe” contained
in the TOOLS folder of CD-ROM to the hard disk of
your computer.
2. Double-click “LAN Display System_v201.exe” on
the hard disk, and start up the installer of the LAN
Display System.
3. Follow the on-screen instructions to install the
software.
• When the installation has been completed, LAN
Display System is automatically executed.
 previous next