Mitsubishi Electronics WD390U-EST Projector User Manual


  Open as PDF
of 69
 
EN-47
• About
Displays the version information of the LAN
Display System.
• Exit
Exits the LAN Display System.
Important:
• Theitemsmarkedwith“*”arenotavailablefor
Mac OS X.
• When“AdvancedScreenCapture”isenabled,
the computer mouse cursor may blink.
Ending the LAN Display projection
5. Click the Exit button on the main user interface or
the menu window to exit the LAN Display System.
6. In case of the wireless LAN communication, unplug
the USB wireless LAN adapter from the projector.
Before unplugging, be sure to press the UNPLUG
button on the remote control and select [Yes] on
the screen by pressing the or button and then
ENTER button.
Important:
• DonotswitchtheinputsourcetoUSBDisplay
or PC Less Presentation during the wireless LAN
communication. If switched, the communication
will be disconnected.
• DuringwirelessLANcommunication,theprojector
cannot communicate with the access point.
• Onlyinfrastructuremodeisavailabletowireless
LAN communication. Adhoc mode is not available.
Installing the virtual display driver
To project a virtual extended screen, install the Virtual
display driver as follows.
1. Double-click “Virtual display driver.exe” contained
in “C:¥Program Files¥LAN Display System”, and
start up the installer of the Virtual display driver.
2. The Setup window is displayed. Click [Next]
and operate according to the instructions on the
window.
3. When the installation has been completed, restart
the computer.
Using remote desktop
Connect an USB device such as a mouse or keyboard
to the USB-A terminal on the projector. While the
computer images are projected with the LAN Display,
the computer can be operated with the device.
AUDIO OUT
AUDIO IN-3R
VIDEO
MONITOR OUT
IN-2
USB-B
USB-ALAN
IN-1
COMPUTER / COMPONENT VIDEO
SERIAL
S-VIDEO
AUDIO IN-3L
AUDIO
IN-2
AUDIO
IN-1
To USB-A
terminal
Important:
• The USB-A terminal on this projector is compatible
with USB 2.0.
• SupportedUSBdeviceisstandardUSBHIDdevice
with power consumption less than 5V/500mA.
• Whenusingakeyboardandmousetogether,we
recommend a commercially available wireless
keyboard and wireless mouse intended for a
computer with wireless receiver.
• WhenusingaUSBhub,youarerecommendedto
use the one with external power supply.
• SomeUSBhubscannotbeuseddependingonthe
specifications.
Advanced display utilities (continued)
 previous next