Filter
Top Products
OWNER’S HANDBOOK
4 Safety & Regulatory Notices
Standards
Safety
This product complies with the European safety
standard EN60950 which will, when applicable,
include the national deviations for the country in
which it is sold.
Electro-magnetic Compatibility (EMC)
This product complies with the following European
EMC standards:
Emissions EN50022 Class B
Immunity EN50082
Notes
All interconnecting cables (for example, signal and
communication cables) should be less than 2 metres
in length. If cable extensions are used, ensure
adequate earth connections are provided and screened
cables are used.
If any metal casework components are removed,
during upgrade work for example, ensure that all
metal parts are correctly re-assembled and all internal
and external screws are re-fitted and correctly
tightened.
Legalities
This equipment complies with the relevant clauses of
the following European Directives (and all subsequent
amendments):
Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC
CE Marking Directive 93/68/EEC
Important
This system complies with the CE Marking Directive
and its strict legal requirements. Use only parts tested
and approved by Mitsubishi Electric PC Division.
Failure to do so may result in invalidating both the
compliance and your warranty. All expansion cards,
drives and peripherals must carry the CE mark to ensure
continued compliance.