Filter
Top Products
2
QUICK START GUIDE
Connecting to the AC power supply
Begin by connecting the Pedion to the AC power supply.
This is necessary becuase the Pedion's internal battery is
initially uncharged.
1. Connect the AC adapter to the DC-IN connector on
the rear of the Pedion.
2. Connect the power cord to the AC adapter, and plug
the power cord into a nearby AC outlet.
Wa r ni ng
Use only the AC adapter that comes with your Pedion. Do not
attempt to use an adapter from any other equipment.
Caution
Use only with a 120-240 volt AC power supply.
Place both the computer and the Pedion on a stable surface (e.g.
desktop or floor). If the AC adapter becomes detached from the
system because, for example, the adapter falls off of a desktop, the
power will be cut off, which may cause data loss.