4
QUICK START GUIDE
Attaching the Multimedia Pack
Once the Pedion’s battery has been fully charged, you
can connect the Multimedia Pack.
1. Ensure the Pedion is turned off.
2. Close the LCD panel and turn the Pedion over.
3. Slide open the battery and multimedia connector
covers on the underside of the Pedion.
4. Align the two small holes on the rear of the Pedion
with the two raised catches on the rear edge of the
Multimedia Pack.
5. Gently press down on the front edge of the Pedion
until it clicks into place. Do not use excessive force.
For more information, see the “Welcome” chapter in
the Owner’s Handbook.