Filter
Top Products
Chapter 4
Using Your Motion M1200 and M1300 Tablet PCs
Motion Computing M1200 and M1300 Tablet PC User Guide 40
Deleting Screen Rotations to Speed Up Display Access
To speed up your use of your display, you can set your Tablet to rotate only
to the orientations you use most of the time and skip the others. To do this:
1. Open the Tablet and Pen Settings window.
2. Select the Display tab.
3. Select the Display tab and then tap Change to open Orientation
Sequence Settings.
4. Disable the unwanted display orientations by selecting (None).
5. Tap OK and then Apply.
CUSTOMIZING
BUTTONS
You can customize the Tablet PC buttons so they perform the functions
that you want. The default button settings of all the buttons are described
in Chapter 2 of this User Guide.
• Escape button (Secondary function is programmable)
• Function button (not programmable)
• Five-way directional control buttons (Secondary functions are
programmable)
• Hot Keys 1 & 2 (Primary and Secondary functions are programmable)
• Security (Ctrl+Alt+Del) not programmable)
To change the default button properties.
1. Double-tap the Tablet and Pen
Settings icon in the System
Tray, located in the lower right-
hand corner of the display win-
dow. Or, go to the Control
Panel and select the Tablet and
Pen Settings icon. This opens
the Tablet and Pen settings
window.
2. Choose the Tablet Buttons tab.
3. Highlight the button you want
to reprogram. The button being
programmed turns red.
4. Select Change.
5. On the Change Button Func-
tions window, tap the down-arrow beside Action for a selection list.
6. Select a new action from the list.
NOTE: For some actions, you only need to select the action to change the button
property. For others, such as to launch a program, you must browse and find the
program; or, to set up a key combination, you must press a sequence of keys.
You can also Reset the button defaults whenever you want.
7. Select OK. The list of actions should now display the new action for
the button you reprogrammed. You can always Reset the button