Filter
Top Products
Chapter 4
Using Your Motion M1200 and M1300 Tablet PCs
Motion Computing M1200 and M1300 Tablet PC User Guide 41
7. Select OK. The list of actions should now display the new action for
the button you reprogrammed. You can always Reset the button
defaults by tapping Reset on the Tablet Buttons window.
ADJUSTING
BRIGHTNESS
FOR DIFFERENT
LIGHTING
SCENARIOS
You may want to adjust the brightness level of the Tablet PC display for
different lighting situations and for improving battery life.
• From the Motion Dashboard
1. Open the Motion Dash-
board.
2. Adjust the desired bright-
ness level on the Display
Brightness slider.
• From the Tablet and Pen Settings Window
1. Double-tap the Tablet and Pen Settings icon in the Sys-
tem Tray, located in the lower right-hand corner of the
display window. Or, go to the Control Panel and select
the Tablet and Pen Settings icon. This opens the Tablet
and Pen settings window.
2. Tap the Display tab.
3. Adjust the Brightness slider at the bottom of this window. You can
have a different setting when running on AC power versus battery.
IDENTIFYING
THE RIGHT AC
POWER
ADAPTER
You should run your Tablet PC or Motion M-Series FlexDock only with the
specially-designed Motion M-Series AC Adapter, provided with your unit.
The AC Adapter has a distinguishable, right-angled plug on one end. The
only Motion accessory the AC Adapter is compatible with is the M-Series
FlexDock and the Multi-Unit Battery Charger.
CAUTION: Before you plug an AC adapter into the Tablet PC or into any
accessory device, make sure you are using the correct AC power
adapter (the one that came with the Tablet PC or the accessory). The
Tablet PC has an identifying label attached to the cord of its AC power
Adapter. Leave this label attached to ensure you always connect this AC
power Adapter only to the Tablet PC. If you connect this adapter to an
accessory, you may damage the accessory or the adapter.