Filter
Top Products
Chapter 2 • • Hardware Installation
~10~
When hardware installation is complete, it is highly recommended to run
diagnostic program, SP-ADM.EXE, under DOS to check the Control Board, the
Ethernet cabling and Async Concentrator(s) as well as the compatibility
between the PC and C360 Control Board. Before running SP-ADM.EXE, user
has to run IO-IRQ.EXE to setup the Control Board, then run SETUP.EXE to
setup the DOS driver, then run SP-DRV.EXE to install the DOS driver.
For more information about SP-ADM.EXE, please refer to Section 3.5.