Filter
Top Products
For UNIX Users • • Chapter 4
19
1. /dev/fd0135ds18 (A: 1.44MB)
2. /dev/fd096ds15 (A: 1.2 MB )
3. /dev/fd1135ds18 (B: 1.44MB)
4. /dev/fd196ds15 (B: 1.2 MB )
5. /tmp/moxa (Hard Disk )
Select :
For ...
Tar files from driver diskette, please wait ...
Then the MOXA Multiport Board Installation Utility will show for
board installation.
Follow the instructions prompted to install.
Step 5. Now user may shutdown the system and reboot. If user has trouble
in booting the new UNIX kernel, use the backup kernel (/unix.moxa)
to boot the system. The system will work as before. Refer to
Appendix A Troubleshooting.
After the system starts up again, enter into the multiuser mode. The
following message will show:
MOXA C360 SuperPort System Communication Driver (Ver. x.xx)
Setup driver ...
C360 Control Board 1: base I/O address [200] IRQ 10
Async Concentrator's serial no. : 101
Device Driver Setup O.K.
If the following error message appears
C360 Control Board 1: base I/O address [220] not found!
C360 Control Board 2: base I/O address [240] found no concentrator!
Please see Appendix A Troubleshooting.