Filter
Top Products
For DOS Users • • Chapter 3
13
running driver setup program, BIN\SETUP.EXE.
Driver Setup
Change to API-232 and run the setup program, BIN\SETUP.EXE, then choose
C360 and specify the base I/O address, IRQ, number of Async Concentrators,
port numbers range in board and system level, serial numbers in concentrator
level, and communication parameters in port level.
Noticeable fields and functions in "MOXA C360" dialog are explained below:
Async Concentrators: The number of Async Concentrators linked with
each C360 Control Board.
Port number: The range of port numbers for all ports of Async
Concentrators linked with each C360 Control Board.
Interrupt number: The IRQ number of C360 Control Board. Each
Control Board must use its own IRQ, not conflicting with others.
F3: Setup the serial numbers and range of port numbers for all Async
Concentrators linked with each C360 Control Board.
PgDn: Setup the initial values of communication parameters for all
ports of Async Concentrators linked with each C360 Control Board.
These values are used when driver is loaded.
Driver Loading
Having completed the setup, load the TSR driver, BIN\SP-DRV.EXE, at the
DOS prompt (or from within AUTOEXEC.BAT batch file). The driver will
detect the C360 automatically. If all the Control Board(s) and Async
Concentrator(s) are detected, a message similar to below will show: