Filter
Top Products
Chapter 3 • • For DOS Users
~14~
MOXA C360 SuperPort System Communication Driver (Ver. x.xx)
Setup driver ...
C360 Control Board 1: base I/O address [200] IRQ 10
Async Concentrator's serial no. : 101 102
Device Driver Setup O.K.
, which means the C360 driver is installed properly. At this point, user is ready
to execute application that supports API-232 functions, or start developing
applications.
If at least a pair of Control Board and Async Concentrator is detected, a
message similar to below will show:
MOXA C360 SuperPort System Communication Driver (Ver. x.xx)
Setup driver ...
C360 Control Board 1: base I/O address [200] IRQ 10
Async Concentrator's serial no. : 101
C360 Control Board 2: base I/O address [220] not found!!
C360 Control Board 3: base I/O address [240] found no concentrator!!
Device Driver Setup O.K.
Even though the C360 driver is installed, only the ports of the found pair(s) of
Control Board and Async Concentrator will work properly. Please refer to
Appendix A Troubleshooting for possible reasons and solutions.
If not a pair of Control Board and Async Concentrator is detected, one of the
error messages similar to below will show:
C360 Control Board 1: base I/O address [200] not found!!
C360 Control Board 2: base I/O address [220] found no concentrator!!
, which means the C360 driver is not installed properly. Please refer to
Appendix A Troubleshooting for possible reasons and solutions.