Filter
Top Products
7. If you check Use the IP whenever system boots option, then whenever you change the root
password and restart the system, a dialog window will open to ask for Server FTP Port and
Root Password, since they were already changed by the administrator to something other
than the default settings. If the settings made by the administrator are lost, restore default
settings and then rerun the IP installer program.
8. The system will check if the IP address is valid.
9. An Install OK message will appear if the installation is successful. Click on OK to close the
window.
Using DOS Commands under Windows
For some environments, such as MAC, DOS, Linux, and UNIX, some common network tools,
including ARP and PING, can be used to install the VPort. Before proceeding further, make sure
that the ARP and PING programs are provided by your system.
1. Open a DOS command window.
2. Type arp –s <VPort’s IP Address> <MAC address>, and press enter.
3. Type ping <VPort’s IP address>, and then press enter.
4. A reply message will appear if the VPort is successfully installed.
Accessing VPort 2140 Video Server for the First Time
Once the installation is complete, administrators should follow the instructions described in the
next chapter, First Time Accessing VPort 2140 Video Server, to make necessary configurations.
VPort 2140 User’s Manual
2-6