Filter
Top Products
162 MultiModemISI Hybrid Series, ISIHI-2S
Appendix
COMMAND DESCRIPTION
%En
Escape Sequence Options
n
= 0–5
Default:
%E1
and
%E4
By default, the modem responds only to the +++ escape method. However, you can use the
%E
command to set the modem to respond only to the <break> method, to respond to either +++ or
the <break> method, or to ignore both methods and not escape.
%E0
Modem won’t escape
%E1
+++ escape method
%E2
<BREAK> escape method
%E3
Both +++ and <BREAK> escape methods
%E4
Disable
OK
response to +++
%E5
Enable
OK
response to +++
%E1 %E5
Enable +++ method and
OK
response to +++
%E3 %E5
Enable +++ or <BREAK> method and
OK
response to +++
!C0=
n
Network Switch Type
n
= 0, 1, 2, or 5
!C0=0 AT&T 5ESS Custom
!C0=1 Northern Telecom DMS-100
!C0=2 Europe ISDN
!C0=5 U.S. National ISDN-1 (NI-1), factory default
!C6=
n
Data SPID
n
= 0 to 20-character string
!D3=
n
SAPI-O Data TEI
n
= 0 to 63, 240 (auto), 241 (disable)
!D3=0–63 SetsTEI to a fixed value from 0 through 63
!D3=240 Sets data channel for dynamic TEI negotiation (factory default)
!D3=241 Disables TEI
!L Display Network Configuration
!N1=
n
Directory Number 0
n
= 24-character string
!N1=
n
Sets DN for channel 0
!Z=
n
Rate Adaption Protocol
!Z=5 V.120 protocol
!Z=9 PPP protocol
*!C6=
n
Voice SPID
n
= 0 to 20 character string
*!D3=
n
SAPI-O Voice TEI
n
= 0 to 63, 240 (auto), 241 (disable)
!D3=0–63 SetsTEI to a fixed value from 0 through 63
!D3=240 Sets data channel for dynamic TEI negotiation (factory default)
!D3=241 Disables TEI
*!N1=
n
Directory Number 1
n
= 24-character string
*!N1=
n
Sets DN for channel 1
$Dn
Persistent DTR Dialing
n
= 0, or 1
Default:
$D0
(Disabled)
Enables or disables persistent DTR dialing (PDD). PDD causes the terminal adapter to
automatically and continually redial stored telephone number 0 when the port has no active calls
and DTR is high.