Filter
Top Products
MultiModemISI Hybrid Series, ISIHI-2S 49
Chapter 3—Software/Driver Installation
9. To load the configuration, click Next in the Load Configuration dialog box.
10. Then click Finish in the Configured dialog box.
The first TA now is configured.
11. Click Back to return to the Configuration dialog box and repeat steps 5 through 10
to configure the remaining TA(s). If you install multiple ISIHI-2S cards in the same
PC, you must configure two TAs per card installed. For example, if you install four
ISIHI-2S cards in one PC, you have to configure eight TAs (two per card).
12. After both TAs are configured, close the ISDN TA Configuration utility and connect to
the network again.