Filter
Top Products
24 MultiModemISI Hybrid Series, ISIHI-2S
Chapter 3—Software/Driver Installation
5. When the Information dialog box below appears, click OK.
6. The ISI Cards dialog box appears. Click Add.
7. The Add Card dialog box appears, displaying defaults—Ports: 8, I/O Base: 210, and
IRQ: 10. Click Done and then Close.
Note: The ISIHI-2S contains 8 ports. Make sure the default is 8.
8. The ISI Card dialog box appears. Click Restart Now to restart the driver. Then click
OK.
The ISI driver now is installed and you are ready to install the TAs and modems to the
COM ports.