Filter
Top Products
46 MultiModemISI Hybrid Series, ISIHI-2S
Chapter 3—Software/Driver Installation
To Configure the Terminal Adapter
You can configure TAs with ISDN TA Configuration utility, ConfigMenu, or with AT
commands. Instructions for all three are provided in this section.
ISDN TA Configuration Utility
1. Before you start the ISDN TA Configuration utility, disconnect the ISIHI-2S by
removing the RJ-45 cable from the ISDN jack.
2. Insert the diskette labeled Config Utility (ISDNTA). Click Start, Programs, and then
the ISDN TA Configuration Utility icon.
3. The Welcome dialog box appears. Click Next.
4. The Searching for TA dialog box appears. Click Next.